Vendlet V5S Speed Adjust, User Manual

Page: 26 / 27

PART 3 - Technical manual PART 3 - Technical manual
50 51
VENDLET V5S
VENDLET V5S Speed Adjust
VENDLET V5S+
VENDLET V5S+ Speed Adjust
Product no. 6100000 / 6100050 6100100 / 6100150
Max. user weight 200 kg 400 kg
Power supply:
Transformer Class 1 Class 1
Mains supply 230 Volt AC/50 Hz 230 Volt AC/50 Hz
Power rating Up to 200 VA Up to 200 VA
Output voltage 24 Volt DC 24 Volt DC
IP class IPX6 IPX6
Intermittence 10% 10%
Battery (optional): 1,2 AH / 24 Volt DC 1,2 AH / 24 Volt DC
IP class IPX6 IPX6
Control unit:
Output voltage 24 Volt DC 24 Volt DC
IP class IPX6 IPX6
Intermittence 10% 10%
Weight:
Total system approx. 58 kg approx. 58 kg
Red side incl. actuator 27 kg 27 kg
Blue side incl. actuator 27 kg 27 kg
Control unit 3,9 kg 3,9 kg
Length: 208 cm 208 cm
Width: May be adapted to beds between 70 and 140 cm
Expected service life 10 years 10 years
Noise level max. load 65 db(A) 65 db(A)
Turning sheet:
Standard length and width 350 cm / 180 cm 350 cm / 180 cm
Material 100 % cotton 100 % cotton
Slide sheet:
Standard length and width 210 cm / 95 cm 210 cm / 95 cm
Material 100% nylon 100% nylon
System service check Annually Annually
ENVIRONMENTAL CONDITIONS AND DISPOSAL
Environmental conditions
Operation:
Temperature 5 – 40 °C
Air humidity 20 – 90% at 30°C – no condensation
Atmospheric
pressure
700 – 1060 hPa
Storage:
Temperature -10 - +50 °C
Air humidity 20 – 90% at 30°C – no condensation
Atmospheric
pressure
700 – 1060 hPa
Transport:
Take the necessary precautions to protect the electric components against rough jolts, shocks etc.
During transportation in low temperatures, the actuators and motors in the bars might work irregularly
until they have been warmed up to normal room temperature.
Disposal
Do not discard a VENDLET with general household waste. On disposal of a VENDLET,
Vendlet ApS recommends that the system be divided into individual parts and compo-
nents with a view to recycling.
All mechanical steel components may be disposed of as metal parts.
The control unit must be disposed of as electronic waste. Furthermore, it may be
divided into metal waste, cable waste, electronic waste, and reusable plastic.
The actuators may be disposed of as electronic waste. Furthermore, they may be
divided into metal waste, electronic waste, and reusable plastic.
The hand control may be disposed of as electronic waste. Furthermore, it may be
divided into cable waste, electronic waste, and reusable plastic.
The turning sheet and the slide sheet should be disposed of as combustible waste.