PART 3 - Technical manual
PART 3 - Technical manual
38
39
QUICK GUIDE LOCATION
The quick guide should always be placed where it will be visible from the bed and in
proximity to the bed.
ADDITIONAL ACCESSORIES
Speed adjustment
It is possible to upgrade a VENDLET V5S and a VENDLET V5S+ to a VENDLET V5S
Speed Adjust or a VENDLET V5S+ Speed Adjust. It requires the purchase of a new
hand control and perhaps a new control unit. Please, contact Vendlet ApS for more
information.
Battery backup
If VENDLET is to be used in places where it can not
always be conneced to the power system, it is possible
to attach a battery.
Under bed light
Under bed light can be connected and is operated by
the hand control.
Height restriction bracket
On some bed types the VENDLET system can conflict
with the bed wheels or brake when the bed is lowered.
The height restriction bracket ensure that the bed can
not be lowered too much to create a conflict.
The height limiter can be mounted on all beds with the
LINAK LA31 height adjustment motor, including:
•
Invacare: SB750, SB750W, SB755 (85 and 90 cm),
SB900 (2 units), SB 910 (2 units)
•
Comfort System
•
KR Opus
FINAL INSPECTION CHECKLIST
Always perform a final inspection after completing the installation. The final
inspection is carried out by following the checklist below. The list may also be
downloaded at www.vendlet.com.
The desired result of the procedure is a situation where all ”Yes” checkboxes have
been marked. If one or more “No” checkboxes have been marked, the matter should
be investigated and you should consider stop using the VENDLET until the situation
has been remedied and a solution found.
Height restriction switch for Guldmann GB4
The height restriction bracket can not be used for the
Guldmann GB4 care bed. Instead, this height restric-
tion switch must be used for this type of bed.
Actuator turn fitting
The actuator turn fitting makes it possible to turn the
actuator 90° so that the plastic housing of the actuator
does not bump against the bed’s brakes, wheels, etc.
Bracket for Volker 3080
You need to mount special brackets on a Volker 3080
bed before you can mount a VENDLET-system.
Transport and mounting trolley
The transport and mounting trolley for VENDLET pro-
vides better protection of the VENDLET during trans-
port and simplifies the entire mounting and transport
situation.
You can see more about all accessories on
www.vendlet.com.
