PART 3 - Technical manual
PART 3 - Technical manual
34
35
Adjustment of width of mounting brackets
Use up to 3 10 mm spacers if necessary to pull the mounting bracket away from the
bed frame, cf. the “Dimensional side rail requirement” description on page 29-30.
Mount the spacers on the mounting bracket with the provided button head screws
before attaching the mounting bracket to the bed.
One spacer
Two spacers and one top plate
Three spacers and one top
plate
Spacers are delivered in sets of four for which you need one bolt set.
The bolt set contains the following items:
4 6 x 6
mm button head
For 1 spacer
4 6 x 16 mm button head
For 2 spacers
4 6 x 26 mm button head
For 3 spacers
When using spacers the button head bolts for support bars and mounting brackets
must be replaced as described on page 29.
You will need to use top plates if you are using 2 or 3 spacers.
Insert the two pins of the top plate in the holes on the top of the second spacer, with
the biggest cutout facing away from the mounting bracket.
Push the spacers towards the mounting bracket contact face and attach them to the
mounting bracket using the button head screws.
It is now possible to mount the mounting bracket on the bed frame.
Height extension set:
A height extension set will be required when
the height of the bars is insufficient, even if
the actuator fittings are placed in the top most
position.
A height extension set consists of the following
items
:
•
4 height extensions
•
4 8 x 40 mm button head bolts
•
4 8 mm self-locking nuts
•
2 height extension support bars
1. Remove nuts and bolts from the bar brack-
et in both sides
2. Lift up the bar and place the height exten-
sions in both sides
3. Attach an 8 x 40 mm button head bolt
at the bottom of the height extension
and place the height extension support
bar with the welding towards the height
extension at both ends.
4. Tighten the height extension support bar
with a nut in both ends.
5. Remount nuts and bolts at the bar bracket
in both sides.
Remove nuts and bolts
Lift up and place the height extensions
Insert the bolt and place the height exten
-
sion support bar
Remount nuts and bolts
Attach the height extension support bar
