PART 2 - User manual
PART 2 - User manual
18
19
Prone position
VENDLET can also be used when you need to prone a client.
1. Double-click the
button to activate
VENDLET.
2. Place the clients right arm closely
along his body with the palm of the
hand facing the thigh. Move the pil-
low and place it if necessary close to
the right upper arm so that the client
comes to lie with his chest on top of
the pillow.
3. Press the
button to raise the blue
bar.
4. If necessary, press once or twice on
to reduce speed (Speed Adjust).
5. Press the
button to wind the
turning sheet onto the blue bar.
The VENDLET system now turns the
client. Hold your hands on the client’s
shoulder and hip to provide a sence of
safety during the procedure.
Gently support the client as he is
being turned to prone position.
6. Check that the clients head is com-
fortable and that there is room for
breathing.
Watch instruction videos on
our webpage vendlet.com
or scan the QR-code.
Place the clients right arm closely along his body
Check that the clients head is comfortable and
that there is room for breathing.
Gently support the client as he is being turned to
prone position.
Transferring from one bed to another
When the client lies in a VENDLET, the VENDLET - in combination with a slide board
and a slide sheet - may be used to transferring the client onto another bed.
1. First use VENDLET’s turning function to place the sliding board underneath the
client. Insert the sliding board from the side that is turned towards the new bed.
2. Press the
or
button to lower the bar facing the other bed.
3. Press the
or
button to raise the opposite bar.
4. Place a slide sheet on the other bed.
5. Place the other bed right next to the bed with the VENDLET and lower or raise
the bed to a slightly lower position relative to the bed with the VENDLET.
6. Remember to lock the wheels on both beds.
7. Press the
or
button to pull in the turning sheet on the bar facing the other
bed. Now, the VENDLET transfers the client and the slide board to the other bed
and the slide sheet.
8. Hold the slide board with your hands and pull to move the client to the centre of
the bed.
9. Remove the slide board and the slide sheet.
Side rail
If it is estimated that the bedridden must use side rails, the VENDLET models descri-
bed in this manual, have an integrated side rail.
1. Press the
and
button
to raise the bar to the highest
position.
2. Press the
and
button to
slacken the sheet before the cli-
ent is left unattended in the bed.
Note: All previous VENDLET models
require the use of plastic plates!
VENDLET V5S, VENDLET V5S+ , VENDLET V5S
Speed Adjust, VENDLET V5S+ Speed Adjust has an
integrated side rail
