Vendlet V5S Speed Adjust, User Manual

Page: 14 / 27

PART 2 - User manual PART 2 - User manual
26 27
Cleaning and washing instructions
Cleaning of electric and mechanical parts
Clean the electrical and mechanical parts with a damp cloth with water or a mild soap
solution and then wipe the parts with a dry cloth. You could also use a dry cloth with
ethanol.
Never hose down or steam clean a VENDLET system.
Washing instructions, slide sheet
Recommended washing temperature: 60
o
C
Do not tumble-dry
Do not iron
Washing instructions, turning sheet
Recommended washing temperature: 95
o
C
Max. 4% shrinking
Always tumble-dry at normal temperatures to ensure the
continued function of the velcro band. Stretch 2-3 times during
the drying process to prevent the turning sheet from losing its
shape.
Iron or mangle at low/medium temperatures - approx. 150
o
C -
to ensure the continued function of the velcro band.
Troubleshooting
Problem Checklist
VENDLET does not run Is the control unit connected to 230V outlet and is the power on?
Is the green diode on the control unit illuminated?
Are all plugs properly connected on the control unit?
Is the green diode on the hand control illuminated?
Double-click the
button to activate the system.
One of the bars does not turn Are all plugs properly connected on the control unit?
One or both bars do(es) not turn
when the client is lying on the
turning sheet Is the turning sheet running under the bars? The sheet must be
over the bars.
Are all plugs properly connected on the control unit?
One of the bars will only turn in
one direction Are all plugs properly connected on the control unit?
The symbols on the hand control
do not match when the VENDLET
is activated Are all plugs properly connected on the control unit?
The actuators cannot be raised/
lowered or do not go together Are all plugs properly connected on the control unit?
1. If nothing else helps, try resetting the system by simultaneously pressing and
holding the and buttons until you hear 10 beeps. Try using the system
again.
2. Contact a qualified technician or your distributor if the above does not solve the
problem.