Velocity Operation Manual
www.velocitydetection.com
68
Configuring the RS232 Panel Printer
The Velocity panel has been designed to report events to a panel printer. This will provide automatic, or on demand copy listings of the
event log or status information.
Enter the engineer menu.
Select the Network options icon
.
The panel will show the module selection screen, select
the correct ‘Printer’. The port number is shown in the
brackets on the left. When you select the module it will
become highlighted. Press the green tick to confirm the
selection.
The port number will be labelled on the TRM PCB inside
the panel and are also shown in the Velocity Installation
manual (Doc: GLT-261-7-1).
The panel shows the RS232 printer options menu.
If a panel printer is used, set the Baud Rate to ‘
9600
’
(as this is the default baud rate of the panel printer).
Next, select what real time printing options you want
to be enabled, you can choose from:
•
Alarm Real-Time Printing
•
Fault Real-Time Printing
•
Tech Alarm Real-Time Printing
•
Button Press Real-Time Printing
To enable the options, press on the relevant selection
circle.
When done, press the exit icon
. The panel will ask if
you want to save the changes.
Press tick
to save the changes, or press
to
discard.
