Velocity Operation Manual
www.velocitydetection.com
64
Configuring the Network
Enter the engineer menu.
Select the Network options icon
.
The panel will show the module selection screen, select
the correct ‘RS485 Network’. The port number is shown
in the brackets on the left. When you select the module
it will become highlighted. Press the green tick to
confirm the selection.
The port number will be labelled on the TRM PCB inside
the panel and are also shown in the Velocity Installation
manual (Doc: GLT-261-7-1).
The panel shows that the network connection is disabled
(It`s default state).
Press the ‘Address’ field to edit the velocity panel
network address if required (Range 1-64).
(NOTE: A velocity network does not allow for duplicate
node addresses. Each panel much has a unique address
number)
Press tick
to save the changes, or press
to
discard.
Press the ‘Name’ field to edit the velocity panel network
text label if required (43 characters max).
Press tick
to save the changes, or press
to
discard.
