Velocity Operation Manual
www.velocitydetection.com
67
Configuring the Cloud Settings
The Velocity MMP panel has been designed to report events to a central server. This will allow authorised users to view the current
status of the panel. The settings are usually set at the factory, but can be configured by the installer if required.
From the Network menu
, press the Cloud tab.
Enter Server and Port details as required. Make a note of
the MAC address, as this will be needed to register the
panel at the server.
Note: That the server can be entered as a URL, or an IP
address
The Mode setting determines whether remote access to
the panel is enabled or disabled.
To allow an engineer to interrogate the panel remotely,
this should be set to enable. This is to prevent access to a
panel without a responsible person physically at the fire
panel.
This setting wills time out after a short period of
inactivity.
