Velocity Operation Manual
www.velocitydetection.com
41
Setting Day-Time and Night-Time Delays
The day and night time delays are set through the cause and effect programming.
Enter the required cause (as described in the Cause and
Effect section).
When the panel asks for the output effect, enter the
day
time delay in the first delay field
. The delay is entered in
seconds. The maximum delay is 600 seconds (10
minutes).
If no night time delay is needed, set the night time delay
to Zero in the second field.
If a night time delay is needed (e.g. to allow security staff
to investigate an alarm), a delay can be entered into the
night time delay field.
Press the tick
to save the changes. The panel shows
the cause & effect table, with the daytime delay & night
time delays shown in the last 2 columns.
