VTSSC72
06.11.2012
3
User manual
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a
specialized company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.
The
VTSSC72
comes with:
1x
soldering s power cord
1x
soldering iron + tip and stand with tip cleaner
1x
soldering tw tip and stand with tip cleaner
2.
Safety Instructions
Keep this device away from children and unauthorized users.
Do not use near inflammable products or in explosive atmospheres. Only use in properly
ventilated rooms.
Do not touch the shaft or soldering tip as this can cause serious burns. Always re
soldering iron to its stand between uses; always let it cool down after use and before storage.
Incorrect use
may cause fire
.
Always disconnect mains power when the device is not in use or when maintenance activities are
performed. Handle the power cord by the plug only. Do not crimp the power cord(s) and protect
against damage. Have an authorised dealer replace it if necessary.
Do not inhale solder fumes. Dispose solder residue in accordance with local regulations.
Never use the device on live electronic circuits. Make sure power to the work piece is cut and
capacitors are discharged.
3.
General Guidelines
Refer to the
Velleman® Service and Quality Warranty
on the last pages of this manual.
Indoor use only.
Keep this device away form rain, moisture, splashing and dripping
liquids. Never put object filled with liquid on top.
Keep this device away from dust and extreme heat. Make sure the ventilation openings
are clear at all times.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
•
Familiarise yourself with the functions of the device before actually using it.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
•
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temper
©Velleman nv
disposal of the device after its lifecycle
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a
o a local recycling service.
Please read the manual thoroughly before bringing this device into
damaged in transit, don't install or use it and contact your dealer.
Do not use near inflammable products or in explosive atmospheres. Only use in properly
Do not touch the shaft or soldering tip as this can cause serious burns. Always return the
soldering iron to its stand between uses; always let it cool down after use and before storage.
Always disconnect mains power when the device is not in use or when maintenance activities are
power cord by the plug only. Do not crimp the power cord(s) and protect
Do not inhale solder fumes. Dispose solder residue in accordance with local regulations.
Never use the device on live electronic circuits. Make sure power to the work piece is cut and
on the last pages of this manual.
this device away form rain, moisture, splashing and dripping
Keep this device away from dust and extreme heat. Make sure the ventilation openings
shocks and abuse. Avoid brute force when operating the
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
r will not accept responsibility for any ensuing defects or problems.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
