Vela CineCast 2000-0422, Installation And User Manual

Page: 80 / 196

66 CineCast Quad Pro Version 2.6 Installation and User Manual
DECODER Command (45h)
Inline
Mode
Inline Event Triggering Command Execution
0000b MPEG Data Mode (default): Command will remain pending until the cur-
rent MPEG data block has been sent to the MPEG decode hardware.
When an “inline” command is received, it is referenced to the last 64-K
block of MPEG data loaded into the MPEG buffer. The command will
remain pending until the MPEG data from that block has been loaded into
the MPEG decode hardware.
0001b Output SMPTE Time Code Mode: Command will remain pending until a
specific output time code (either MPEG GOP time code or extracted VITC
time code) is reached. Use command 0004 Set Time Code to set the spe-
cific time code.
0010b Input LTC Time Code Mode: Command will remain pending until a spe-
cific Input LTC time code occurs Use command 0004 Set Time Code to
set the specific time code.
0011b Frame Count Mode: Command will remain pending until a specific frame
count is reached. Use command 0024 Set Frame Count to set the specific
frame count.
0100b Playback Start: Command will remain pending until MPEG play has
started.
0101b Playback End: Command will remain pending until MPEG play has
stopped.
0110b GPIN1 Active: Command will remain pending until GPIN1 is activated
(grounded).
0111b GPIN1 Inactive: Command will remain pending until GPIN1 is deacti-
vated (open).
1000b GPIN2 Active: Command will remain pending until GPIN2 is activated
(grounded).
1001b GPIN2 Inactive: Command will remain pending until GPIN2 is deacti-
vated (open).
1010b Adjacent Channel Output SMPTE Time Code mode: Command will remain
pending until a specific output time code of the adjacent channel is
reached. Use command 0004 Set Time Code to set the specific time code.