Vela CineCast 2000-0422, Installation And User Manual

Page: 177 / 196

Chapter 3 — The Video Playback Controller 163
Dynamic Settings Window: Default
(Figure 3-17) Click on Dynamic Settings from the Playback Controller bar to
display and change the following playback parameters:
Blank Video Button – Video is muted while audio playback continues.
Playback (Freeze on Stop) – Stops video playback immediately and freezes
frame of last image.
Routing – Set output selection for the two outputs (primary and secondary) from
six possible sources.
Video Switch – Sets when to fade or switch video source. Video switching
requires both channels to be genlocked to the same genlock source.
Fade Time – Sets amount of time to fade between clip switching.
Swap L/R Channels – When checked, the left and right channels are swapped.
Audio Section – Selects the primary and secondary audio sources (see listing
on following page):
Figure 3-17.Dynamic Settings Window (Default View)