Vela CineCast 2000-0422, Installation And User Manual

Page: 178 / 196

164 CineCast Quad Pro Version 2.6 Installation and User Manual
In addition, the primary and secondary audio sources may be set to stereo, left, or
right-only by clicking the desired radio buttons.
Click OK to save current (or changed) settings and dismiss the window. Click
Cancel to dismiss the window without saving any changes that may have been
entered. Click Apply to save the changes without dismissing the window.
Dynamic Settings Window: Inline
(Figure 3-18) Dynamic Settings shown with the Inline checkbox enabled. The
window expands to display the following items:
Triggered Events – Allows commands to remain pending until the specific
event occurs, as defined in Time Code. The desired inline event can be selected in
the drop-down list box.
Time Code (Immediate) – When this radio button is checked, the pending
command is executed immediately by clicking the Apply button.
Time Code (Output) – The desired inline command will remain pending until a
specific output time code (either MPEG GOP time code or extracted VITC time
code) is reached. A time code display will appear if this button is checked. See
Figure 3-19.
Time Code (Input) – The desired inline command will remain pending until a
specific Input LTC time code occurs. A time code display will appear if this but-
ton is checked. See Figure 3-20.
Time Code (Frames) – Command will remain pending until a specific frame
count, entered in the text box, is reached. See Figure 3-21.
Click OK to activate the pending command and dismiss the window. Click Cancel
to dismiss the window with no action. Click Apply to activate the pending
command without dismissing the window.
IBM Decoder Audio
Crystal Audio output #1
Crystal Audio output #2
Adjacent channel IBM Decoder Audio
Adjacent channel Crystal Audio
output #1
Adjacent channel Crystal Audio
output #2