28
6 Set up with the indicating and adjustment module
VEGAFLEX 83 • 4 … 20 mA/HART - two-wire
41834-EN-120726
In the menu item "
Block/allow adjustment
", you can protect the sensor
parameters against unauthorized modification. The PIN is activated/
deactivated permanently.
The following adjustment functions are possible without entering the
PIN:
•
Select menu items and show data
•
Read data from the sensor into the indicating/adjustment module.
Caution:
With active PIN, the adjustment via PACTware/DTM as well as other
systems is also blocked.
You can change the PIN number under "
Additional adjustments/PIN
".
Here you can assign a suitable measurement loop name. Push the
"
OK
" key to start the processing. With the "
+
" key you change the sign
and with the "
-
>" key you jump to the next position.
You can enter names with max. 19 characters. The character set
comprises:
•
Capital letters from A … Z
•
Numbers from 0 … 9
•
Special char - / _ blanks
In this menu item you select the distance unit and the temperature
unit.
With the distance units you can choose between m, mm and ft and
with the temperature units betwenn °C, °F and K.
In this menu item you can enter the probe length or have the length
determined automatically by the sensor system.
When choosing "
Yes
", then the probe length will be determined
automatically. When choosing "
No
", you can enter the probe length
manually.
Lock/release setup/ad-
justment
Setup/Measurement loop
name
Setup/Units
Setup/Probe length