27
6 Set up with the indicating and adjustment module
VEGAFLEX 83 • 4 … 20 mA/HART - two-wire
41834-EN-120726
– Edit parameter
– Save value
•
[->]
key:
– Presentation change measured value
– Select list entry
– Select editing position
•
[+]
key:
– Change value of the parameter
•
[ESC]
key:
– interrupt input
– Jump to next higher menu
The sensor is adjusted via the four keys of the indicating and adjust-
ment module. The LC display indicates the individual menu items. The
functions of the individual keys are shown in the above illustration.
Approx. 10 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with
[OK]
will not be saved.
6.3 Parameter adjustment
Through the parameter adjustment the instrument is adapted to the
application conditions. The parameter adjustment is carried out via an
adjustment menu.
The main menu is divided into five sections with the following func-
tions:
Setup:
Settings, for example to measurement loop name, medium,
vessel, adjustment, signal output, device unit, false signal suppres-
sion, linearization curve
Display:
Settings, e.g., for language, measured value display, light-
ing
Diagnostics:
Information, e.g. on the instrument status, pointer, reli-
ability, simulation, echo curve
Additional adjustments:
Reset, date/time, reset, copying function
Info:
Instrument name, hardware and software version, calibration
date, instrument features
Note:
For optimum adjustment of the measurement, the individual submenu
items in the main menu item "
Setup
" should be selected one after
the other and provided with the correct parameters. If possible, go
through the items in the given sequence.
The procedure is described below.
Adjustment system
Main menu