-60 dBm < Signal Level < -50 dBm
-50 dBm < Signal Level < -40 dBm
Signal Level > -40 dBm
#Packets (100ms/channel)
: Number of 802.11 packets received from the client. This value is sampled as each channel in
the 2.4 GHz and 5 GHz frequency band is monitored for a period of 100ms in a round robin fashion.
Signal Level:
Received signal level from the client measured in dBm. Note that although the Air Expert measures the signal
level of incoming 802.11 frames, it may not be representative of the signal level as seen by the AP, unless the
measurements are taken next to the AP under test. This field displays “—“ if the client is out of range. This means that the
client information came from an 802.11 frame transmission from the AP to the client, but the client transmissions are not
detected by the Air Expert because they are out of range.
8.1.4 Client Scan Details Window
Selecting a client from the Client Scan Table and pressing
Details
opens up a pop-up window with additional details. Fields
displayed on the details window may or may not be present depending on the information being advertised by the client and AP.
Press the
OK
key to close the Details window and return to previous screen.
Press the
More
key to view the next page of the Details window.
If a Warning sign is associated with the client, a box describing the causes for warning is displayed on the first
page of the
Details
Client Scan Warning Conditions
, for descriptions of warning conditions.
Refer to
Client Scan Measurement Descriptions
for a description of measurements presented in the
Details
window.
Client Scan Details Window
8.1.5 Client Scan Warning Conditions
If a Warning sign is associated with the client, a box describing the causes for warning is displayed on the first page of the Details
screen. One or multiple causes could trigger a warning. If multiple causes are present, they are all listed in the warning box.
Client Scan Details Window Warning Box
WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00
