Locate Antenna (MTTplus-900 only):
From the drop-down menu, select
Internal
or
External
. This setting determines if
the internal or external directional antenna will be used for the AP or Client Locate functions (see (see
). This setting is only used for the Locate function. For all other functions, only the
internal antennas are used.
Location Label
: From the drop-down menu, select
OFF
or
ON
. When enabled this setting allows to add a location label
during the Signal level tracking function (see
Signal Level Tracking with Location Label
Label Type
: From the drop-down menu, select
Residential
,
Business
, or
Custom
. This setting is only available if Location
Label setting is
ON
. Press the magnifying glass icon
to view or edit the location labels.
Residential Location Label editing
The
Residential
and
Business Location Label
lists comes with 14 pre-populated location labels reflecting the most common
places to run the site survey. Each can be further edited or overwritten using the magnifying glass icon
. Press the
More
key
to access 14 additional custom labels or press
OK
to close the list. The Custom label list has 28 fully customizable location labels
and can be used for locations that do not fall under the Residential or Business categories.
V-Probe Discovery Mode
: Local or Remote. This setting controls the communication for discovery and control of the V-
Probe from the Air Expert. Use
Local
mode if both V-Probe and Air Expert are located in the same subnet. Use
Remote
Access
mode if the V-Probe is located on a public IP address and the Air Expert is located in a private network. An
external XMPP registration server can be used to register. Contact Customer support for instructions on how to setup a
registration server.
XMPP Login Menu for V-Probe Discovery
WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00
