The test settings displayed in the test status bar are the same as the test items displayed in the Graph tab. Refer to
for a description of each item.
Detailed Table Results:
The following measurements are displayed on the Table results. Results are updated every second while
level tracking is running.
Time:
Display in HH:MM:SS format when the measurement was taken.
Throughput:
Displays per-second average value of data throughput (UDP or TCP) in Mbps.
Phy Tx bit Rate:
Displayed in Client to Server test direction. Displays the per-second average physical layer transmission
rate for the WiFi frames. The transmission rate depends on the AP and Client capabilities, as well as the RF environment.
Refer to
for details. The WiFi Air Expert series Maximum Phy Rate is 1299 Mbps.
Phy Rx bit Rate:
Displayed in Server to Client test direction. Displays the per-second average physical layer reception rate
for the WiFi frames. The reception rate depends on the AP and Client capabilities, as well as the RF environment. Refer to
for details. The WiFi Air Expert series Maximum Phy Rate is 1299 Mbps.
Signal Level
: Received Signal Level from the SSID measured in dBm.
Table Scrolling
Use the Page Up/ Page Down arrow keys to scroll through the table page by page.
Use the Up and Down arrow keys to scroll through the table row by row.
WiFiAirExpertSeries_eManual_D07-00-120P_Rev A00
