Press ENTER to select that character. The character will ap-
pear in the URL line. Repeat this until done then press STOP
(F3) to exit the character grid.
• If a mistake is made, press STOP (F3) and use
to select
the incorrect character.
- Press DELETE (F2) to delete the character.
- Press INSERT (F1) to add a character to the left of the
selected character.
- Press OVER (F1) to replace the selected character.
6. Press F4 to save and return to PING configuration.
#PINGS
Options: 1-999999; default is 10.
Select the number of PINGS to send. Use SHIFT, the number key
-
pad and
to enter a number, or press F1 for continuous.
PING LEN
Options: 64-1500 bytes; default is 64.
Select the PING length to send. Use SHIFT, the number keypad
and
to enter a value.
PING/SEC
Options: 1-10; default is 1.
Select the number of PINGS to send per second from. Use SHIFT,
the number keypad and
to enter a value.
When ready, press F4 to begin. Press again to stop. The follow
-
ing is reported:
PING:
result will indicate:
PING: –
: The test hasn’t been started.
PING: IN PROGRESS
: The test is in process.
PING: PASS
: At least 1 echo response has been received.
PING: FAIL
: An echo response has not been received.
PING: NO DNS SERVER
: The DNS server is unavailable.
PING: DNS LOOKUP FAILED
: The IP address could not be
associated with the host name.
The bottom of the screen reports the statistics of the test:
Sent
: Number of PINGS sent to the network.
Recv’d
: Number of correct echo responses received.
Unreach
: Number of echo responses with an unreach flag.
Missing
: Number of echo responses missing.
Round Trip
: Measure of the round trip delay in milli seconds.Crnt
(Current), Avg (Average) and Max/Min (Maximum and Minimum)
is reported.
MTT-14B e_Manual D07-00-083P RevA00
Page 45 of 101
