VeEX FX150 User Manual Download Page 110

Page: 110 / 128

OTDR Series

e-Manual, RevE00

Page 110 of 128

8.4.2 Saving OTDR Traces

Configure

Autosave

in the

Setup

screen or save OTDR traces manually from the

Results

screen. The Autosave options can also be configured from the

Results

screen. See

Section

7.5 Autosave Parameters

for more information about Autosave options.

Results tab: Save options

The traces are saved in the following folder directory hierarchy:

•

Job ID

•

Cable ID

•

Fiber ID

•

Results – Traces

The

JobID

CableID

FiberID

TraceID

fields determine the location to which the trace

is saved. If these settings are not set accurately, the trace will not save to the desired

location.

To save Traces:

1. On the

Results

tab, select the trace you want to save.

2. Click

Save

, then click

Save

. The

Result Saving

window appears.

Summary of Contents for FX150

































































































































Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands

VeEX FX150, User Manual

Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands