VeEX FX150 User Manual Download Page 102

Page: 102 / 128

OTDR Series

e-Manual, RevE00

Page 102 of 128

8.3.2 OX-MPO-12 Connections/Ports

OX-MPO-12: Example of Connections

The MPO switch is detected automatically when powered on. However, the switch

can be connected at any time; close and re-open the OTDR application and begin

MPO testing.

To connect OTDR to Optical Switch:

1. Use the Micro-USB (B) to Micro-USB (B) cable to connect the switch interface to the OTDR

port.

2. Close and reopen the OTDR application to detect the switch.
3. Attach one end of the 1 m SC-APC to SC-APC simplex patch cord from the OTDR port to

the SC-APC port of the switch.

4. Attach Launch and Receive patchcord cables to the output port of the OX-MPO-12 Switch.

Test Kit Cases to use with the MPO switch are available for purchase from

VeEX.

•

MPO/APC to MPO/UPC hybrid cable to test MPO/UPC FUT (Fiber under

test) and receive cable.

•

MPO/APC on both ends (MPO/APC FUT).

•

MPO/APC to simplex cable fanout 2x (SC-APC, SC-UPC, FC-APC, FC-

UPC, LC-APC, LC-UPC…) to test simplex FUT cable.

Contact

VeEX Customer Care

for more information.

Summary of Contents for FX150

































































































































Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands

VeEX FX150, User Manual

Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands