VeEX FX150 User Manual Download Page 81

Page: 81 / 128

OTDR Series

e-Manual, RevE00

Page 81 of 128

7.4.1.2 V-Scout LinkMap

Any event that exceeds user-defined Pass/Fail thresholds will be displayed in

RED

font. The

icon box will be outlined in red. For information on symbols, see

Section 7.4.1.3 V-Scout

symbols

V-Scout Link Map

•

Start:

Begins the measurement.

•

Rebuild:

Reanalyzes the trace or visible traces only. Use this option when you change

the trace event table(s) or icons want to rebuild the LinkMap to apply the changes.

•

Modify:

Modifies the LinkMap.

•

Span:

To redefine the Span Start/End, select the Event, then click Span and choose the

applicable option, Span Begin, Span End, or Edit (to change Span setup details).

•

Information:

Displays measurement information.

To view contents of a merged event, double-tap the LinkMap or Event table.

Summary of Contents for FX150

































































































































Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands

VeEX FX150, User Manual

Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands