VeEX FX150 User Manual Download Page 20

Page: 20 / 128

OTDR Series

e-Manual, RevE00

Page 20 of 128

5.4.1 RXT Front Panel

•

Power:

Press for 2 seconds to turn

the test set ON or OFF (prevents

accidental ON/OFF)

•

Cursor Keys:

Application

dependent; May offer alternative

GUI Navigation to touch screen

(e.g. while wearing gloves in cold

weather)

•

Enter

: Application dependent

•

Escape:

Application dependent

•

Alt Alternate function:

Links the

buttons to the GUI soft Function

Keys (MTT Emulation Mode only)

•

Clear History:

Resets blinking

LED reminders of past Errors or

Alarms. Test results are not

affected. (not used in OTDR)

•

Volume and Brightness Control:

(it also acts as the MTT F1 key,

when the Alt key is active) Brings

up the Sound and screen

Brightness controls; Use cursor

buttons to adjust the levels

•

Test Application Selector

(it also

acts as the MTT F2 key, when the

Alt key is active): Quickly switches

back and forth between the active

Test Application and RXT platform.

Utilities functions; Active test is not

affected.

•

Lock/Unlock Touch Screen:

Can

also be programmed to capture

screen shots

(>Utilities

>Settings>Global>Save

Settings

)

•

Home:

Returns to the Main Menu

•

Save Test Results

: In OTDR test

mode, selects the

Results

tab.

Summary of Contents for FX150

































































































































Search results

Summary of Contents for FX150

Reviews:

Brands by name

Popular brands

VeEX FX150, User Manual

Search results

Summary of Contents for FX150

Reviews:

Brands by name

Popular brands