VeEX FX150 User Manual Download Page 52

Page: 52 / 128

OTDR Series

e-Manual, RevE00

Page 52 of 128

6.8.9.1 File Manager Filters

File Filters make it easier to isolate desired types of results from all other test results stored in

the test set. It also reduces the number of pages displayed.
To activate filters, use the stylus to tap the

icon.

Fiber inspection test results belong to

Common Mode

and

Fiber Scope Tests

. Filter

parameters can be combined.

To reset filters, tap the

Show All

button.

To make locating test results and reports easier, sort the results by tapping a header to sort by

that field’s type, in ascending or descending order.

6.8.10 Fiber Scope Image Management Software

For information on using Fiber Scope Management Software, see the

Fiber Scope User

Manual

www.veexinc.com

Summary of Contents for FX150

































































































































Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands

VeEX FX150, User Manual

Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands