VeEX FX150 User Manual Download Page 6

Page: 6 / 128

OTDR Series

e-Manual, RevE00

Page 6 of 128

MPA Product Technical Support

Support is generally available 8:30 AM to 5:30 PM, Eastern Standard Time, Monday to Friday.

Phone:

+1 877 929 4357

International

: +1 727 475 1206

E-mail

[email protected]

1.2 Warranty

For warranty information on VeEX products, go to

https://www.veexinc.com/Support/Warranty

To activate the warranty, please register your product at

https://www.veexinc.com/Support/ProductRegistration

1.3 Patent Information

VeEX product hardware and software may be protected by one or more patents on file with the

United States Patent Office.

1.4 Documentation Conventions

Icons used in this manual:

Marks a helpful tip (action or method), which can save time and improve usability of

the product.

Provides important information needed to use this product and avoid missteps.

Cautions against and action or inactivity, which can hinder productivity.

Strongly warns against a condition, an action, or inactivity which can lead to a

health hazard, injury, equipment damage, data loss, and/or financial losses.

Stop and read before continuing.

Summary of Contents for FX150

































































































































Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands

VeEX FX150, User Manual

Search results

Summary of Contents for FX150

Reviews:

Related manuals for FX150

Brands by name

Popular brands