VeEX FX150, User Manual

Page: 84 / 128

OTDR Series e-Manual, RevE00 Page 84 of 128
7.5 Autosave Parameters
Use Autosave to save results automatically with default information in the filename.
OTDR Setup: Autosave Parameters-General
Auto Save : To enable/disable autosave. Disabled, Enabled, Report or V-
Scout Report. (Choose the Report options to be able to export results to PDF.)
Ask Before Save
: Check this to be prompted to save after measurement is completed.
The following information can be pre-set to create a name and increment fiber or trace number
automatically. The filename will begin with the Index value, Trace ID, Wavelength, Pulse
Width, and S/N, if checked.
•
Increment : Choose to increment Fiber ID or Trace ID.
•
Job ID : Select the field to enter a default value that will be included in the filename.
•
Cable ID: Select the field to enter a default value that will be included in the filename.
•
Fiber ID - Select Add Index to auto-increment or select Add Date/Time . The filename
will include details entered in this field automatically. The fiber count can be
incremented in Trace ID or Fiber ID.
•
Add Index (Fiber) : Test counter. When saving test results, count auto increments and
is added to filename. To change the value, click Fiber Index and select Force to enter
a specific value or Reset to reset the counter.
•
Trace ID
- Select
Add Index
to auto-increment or select
Add Date/Time
. The filename
will include details entered in this field automatically. The fiber count can be
incremented in Trace ID or Fiber ID.