Vector Revolution 180, Operating Manual, Page: 143 / 151

Care and Maintenance
10
________________________________________________________________________________________
_______________________________________
10
-
3
K
Axis bearings X
axis, Y axis and Z
axis. 160 hrs Lubricate grease
nipples on all 4 linear
motion bearings on
each axis X, Y and Z. Kluber
ISOFLEX
NBU15
M
Top tape guide 160 hrs Lubricate guide bars
with light oil. Guide must spring
freely up and
down.
N Motor Bearings 320 hrs Check for noisy
bearings. Replace as
necessary Damaged bearings
can cause
premature and
motor failure!
O Vacuum pump 1000 hrs Full service Castrol Aircol
PD100
Shell Corena
P100 Regular service
P
Gear Motor 1000 hrs Check for noise Unserviceable
NOTES
I
A
G
G
M
A