11
AW DX22CE
7. Remove all protective plastic from the stainless steel surfaces, see figure 12.
Figure 12.
Figure 13.
10. The indoor unit is connected to 230 VAC through the junction box as per figure 15. To minimise dirt accumulation in the
heater the fan should stop when there is no need for heating.
8. Attach the cable ties to the holes on the wall bracket inside where the fan motor cable will run, figure 13.
9. Fasten the motor cable with the cable ties as per figure 14 and then install the junction box on the wall.
Figure 14.
Figure 15.
Figure 11.
6. Protect meters and copper pipes with self-amalgamating tape or similar that can resist the corrosive environment, before
insulating the pipes, see figure 11.
