8
AW DX22CE
GB
Use
This appliance may be used by children aged eight years or above, people with physical and/or
mental disabilities as well as those who lack any experience – provided that they have received
detailed instructions of the appliance’s functions and any risks.
Children must not play with the appliance. Cleaning and maintenance must not be performed by
children without proper supervision.
Children under three years of age should not be near the appliance without constant supervision. Children
between three and eight years old may only turn on/shut off the appliance if it is located in a suitable posi-
tion and they have received instructions about the proper course of action, or are being supervised.
They must also be informed of possible dangers.
Children between three and eight years old may not connect the device, change its settings or
perform care/maintenance.
WARNING - Parts of this appliance can get hot and cause burns. Children and
vulnerable people must be kept under supervision.
Danger of Electric Shock!
If this warning is not observed it can lead to injury or death.
Before carrying out maintenance on the unit it is important to always turn the main switch off
and lock it in the off position.
The unit may have more than one power switch.
Reduce the risk of injury!
If this safety instruction is not observed it can lead to injury. Sheet metal edges may be sharp
or have burrs.
Use suitable protective clothing, safety glasses and protective gloves when handling, cleaning
and carrying out maintenance of this product.
AW DX22CE for Corrosive Environments
The indoor unit AW DX22CE is used together with an outdoor unit to heat corrosive environments such as in chemical industries
purification plants, car wash facilities etc.
AW DX22CE is protected against dust and water jets, with protection class IP65. Technical data for indoor unit AW DX22CE,
see appendix A.
Design
Case and deflectors are made in stainless acid-proof steel, EN 1.4404. Coil with copper piping and aluminium fins that are
surface treated with ElectroFin E-coat.
This means that the entire coil is dip painted with flexible epoxy polymer with a 100% cover rate.
Thermic loss for the coil is less than 1%. Fin space 3mm.
Cleaning plate with quick release for simple cleaning.
Comes with a wall bracket.
Controls
AW DX22CE does not have its own controls. It must be controlled by the outdoor unit and its controller.
Dimensioning an Indoor Unit/Outdoor Unit.
When combining the outdoor unit with indoor unit AW DX22CE it is important that the inner volume of the AW DX22CE coil
corresponds to the outdoor unit manufacturer’s recommendations for optimal and safe use.
It is also possible to connect more than one indoor unit to an outdoor unit.
This must be done according to the outdoor unit manufacturer’s instructions.
Installation
The coolant unit installation must be carried out by a certified refrigeration technician.
The electrical installation must be carried out by a certified electrician.
The indoor unit must be installed at least 850 mm above the floor to keep small children from reaching the fan motor’s
moving parts.
Installation Tips
Fingerprints and smudges are easily left on stainless steel surfaces.
Leave the protective plastic on stainless steel surfaces until installation has been completed, or use gloves that do not leave prints on
stainless steel.
