vds MARQUEE ACON Ultra Camera Kit, Operation & Maintenance Manual

Page: 45 / 93

Marquee ACON Ultra Installation/Operation Guide
2-22 AU User Controls, Settings and Operation
AGC routines contain 4 pre-defined sets of parameters Level 1 – Level 4. Level 1 allows
the least complex search pattern. The complexity of the search increases with each
higher level. Any user defined settings are placed in the custom level.
Default Complexity Level and Controlled Parameters are set for each projector with the
“Base AGC” operation from the “Auto Setup Dialog”
Test Scores
Test Current Level
button performs a test using the settings that are currently active in the
projector. The results of the test are displayed on the four result graphs
Auto Correct button performs the search operation using the selected Complexity Level
and Control Parameters. If either has been edited and the changes not Applied, the user
is prompted to apply the changes (or discard them) before the search is performed. After
the search is complete, the results are displayed on the four result graphs.
Result Graphs. A combined or comprehensive score is displayed on the topmost graph.
Each color’s contribution to the score is displayed below. Any score – either an
individual color, or the comprehensive score – below 50% indicates a failure condition for
the AGC. Higher scores are desirable.
2.2.3.2.3 Picture Window
The picture window displays the ACON camera’s current field of view. This field of view can be
changed, either through the
Basic Motor
tab, the
Advanced Motor
tab, or by double clicking the picture
itself.
A double click on the picture will move the point of the click to as close to the center of the field of
view as possible.
•
Picture : Double click on the image. This will move the clicked point to the center of the image.
2.2.3.2.4 Additional Controls
Additional controls provide specific functionality that facilitates editing the test point information.