VDO SmartTerminal Operating Instructions Manual Download Page 42

Page: 42 / 76

User Manual VDO SmartTerminal - Edition 01/2020

VDO TerminalTools

Terminals

© Continental Automotive GmbH

device.
If this option is deactivated, no data is removed from the
download key.
By default, no data is removed from the download key.

• Loudspeaker

Activates / deactivates the loudspeaker on the VDO
SmartTerminal
The loudspeaker is active by default.

• RFID reader

Activates / deactivates the RFID reader on the VDO
SmartTerminal
If the RFID reader is activated, the driver is requested to
scan his/her driver's license after insertion of a medium
into the device.
The RFID reader is activated by default.

Dropdown menu screen saver

Information

Description

Screen saver

• Start screen saver

Activates / deactivates the screen saver on the device
The time to activation can be set under option

Start

after X minutes

The screen saver is activated by default and starts after
10 minutes.

• Start after X minutes

This option specifies after how many minutes the
screen saver starts on the VDO SmartTerminal. The op-
tion is only available when option

Start screen saver

activated.

Summary of Contents for SmartTerminal













































































Search results

Summary of Contents for SmartTerminal

Reviews:

VDO SmartTerminal, Operating Instructions Manual, Page: 42 / 76

Search results

Summary of Contents for SmartTerminal

Reviews: