VDO CONTISYS OBD -, Instruction Manual

Page: 74 / 144

FastCheck
72
FastCheck TPMS
The TPMS (Tyre Pressure Monitoring System) function can be used to re-program tyre
valves on vehicles fitted with TPMS valves, refer to the coverage in the table below:
Citroen, Peugeot, Fiat and Lancia (Type 1)
For Citroen, Peugeot, Fiat and Lancia, the only option is to program all valves using
the following procedure:
1. When requested activate each TPMS valve in turn starting with the front left
wheel, front right wheel, rear right then rear left wheel. In order to activate the
valves, a TPMS Valve Activator Tool should be used. When activated, the valve
is forced to transmit its valve code and status to the vehicle’s body control
module.
2. When the body control module receives the transmission, it stores the tyre valve
code for the current wheel which is also indicated by the service tool.
3. When each valve code has been programmed, the service tool will show a
confirmation message, at which point you can confirm programming or abort.
Citroen, Peugeot, Fiat and Lancia (Type 2)
With these vehicles all tyres need to be inflated to 3.7 bar for programming to be
successful. In order for the valves to transmit their codes a TPMS Valve Activator Tool
should be used.
Manufacturer Vehicle - Type 1 Vehicle - Type 2
Citroen C4
C5
C5 II
C6
C8
Peugeot 307 II
407
607
607 II
807
Fiat Ulysse
Lancia Phedra
Renault Megane II
Scenic II
Laguna II
Espace IV
Vel Satis