Appendix D: Manual service reset
134
Volkswagen
Cabrio, Golf III, GTi, Jetta III (1993 - 1995) and Jetta (1996)
One of four service codes may be displayed on instrument panel according to
distance travelled. Each service code displayed determines the type or level of
maintenance required. The service code will flash for approximately 3 seconds in
odometer display window as the ignition is turned on. When servicing becomes due
(every 7,500 miles), the appropriate service code will flash for approximately 60
seconds. The four service codes available for display are as follows:
• IN 00 (No Service Necessary)
• OEL (Oil Change Service) - Every 7,500 Miles
• IN 01 (Inspection Service) - Every 15,000 Miles
• IN 02 (Additional Servicing Work) - Every 30,000 Miles
After performing the required maintenance, each effected service code displayed
must be reset individually. For example, at 15,000 miles service codes OEL and IN 01
will both need to be reset.
1. To reset the SRI, turn the ignition switch to the ON position. Press and hold the
odometer reset button
A
. Whilst holding button
A
, turn the ignition switch to the
OFF position.
2. Service code “OEL” will be displayed. To reset this counter, press and hold
button
B
until 5 dashes appear on the display.
3. If necessary, press the button
A
to display “IN 01”. To reset this counter, press
and hold button
B
until 5 dashes appear on the display.
4. If necessary, press the button
A
to display “IN 02”. To reset this counter, press
and hold button
B
until 5 dashes appear on the display.
5. To exit reset mode, turn the ignition switch to the ON position.
6. When “IN 00” is displayed, turn the ignition switch to the OFF position.
CON0036
A
B
Summary of Contents for CONTISYS OBD -
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN ...
Page 2: ......
Page 143: ......
Page 144: ......
