vc999 85.47i D, Original Operating Manual

Page: 26 / 34

Shrink Tank VC999 85.47i
Page 26/34
Art. no. 512.320 2009-11-17
12.2 Fault Announcements on the Display Panel
Number Fault Cause Action
10 Interruption of temperature sensor Defective temp. sensor or
measuring connection Contact VC999 Customer
Service
11 Temperature sensor short-circuited Defective temp. sensor or
measuring connection Contact VC999 Customer
Service
12 Upper cylinder sensor is
permanently on Defective cylinder sensor
PCB defective Contact VC999 Customer
Service
13 Lower cylinder sensor is
permanently on Defective cylinder sensor
PCB defective Contact VC999 Customer
Service
14 Platform is not in immersion position
when down Platform either blocked or not
activated Contact VC999 Customer
Service
15 Platform is not in base position
when up Platform not in correct position
Platform sensor defective Contact VC999 Customer
Service
16 Compressed air is inadequate Compressed air is not connected
Leakage in compressed air line Connect compressed air
(see section 8.2)
Check supply
18 Motor thermal element has cut out Drive motor taking too much
current
Thermal relays wrongly set
Fault in drive motor Check if drive is over-
loaded (friction)
Check setting of thermo
relays (see electrical sheet)
Contact VC999 Customer
Service
80 Filling time exceeded Filling device interrupted or
blocked
Drain tap open
Check filling device
Close drain tap
90 Access through key protected Key in program closed Open the key
98 Carry out decalcification Decalcification interval reached Dip tank decalcification carry
out through operator with
decalcification program.
99 Carry out maintenance Maintenance interval reached Maintenance carry out
through VC999- Customer
service