vc999 85.47i D, Original Operating Manual

Page: 10 / 34

Shrink Tank VC999 85.47i
Page 10/34
Art. no. 512.320 2009-11-17
NOTICE
The owner is solely responsible for workplace safety and adherence to statutory regulations
regarding machine handling.
•
This operating manual is part of the machine. If it is lost or damaged, immediately order a replacement
copy via our Customer Service. Please always state the type of machine and the machine’s serial
number (on the nameplate).
2.5 Machine stability
Machine stability is guaranteed on a flat surface during normal operation if the machine is standing
correctly on all 4 machine feet and is leveled horizontally.
Stability must be guaranteed during the full life of the machine, in particular during transport, assembly,
operation, inoperative periods, disassembly, inspections, and foreseeable faults.
In these situations, the machine must be sufficiently secured against moving, tilting and falling to prevent
personal injuries and damage to the machine and the environment.
The owner is solely responsible for adherence to these requirements.
2.6 Requirements for operators
The machine should only be operated, serviced, and repaired by authorized and fully trained and
qualified personnel. It is the responsibility of the owner to inform operators of possible dangers.
Ensure that responsibilities with regard to assembly, operation, and repairs are clearly defined and
communicated by the owner to guarantee that health and safety regulations are observed.
Operators are obliged to make sure the machine is in efficient working order prior to operation and to
inform superiors immediately about any changes which constitute a risk to human safety or device
functioning.
The operator must ensure that only authorized personnel work at the machine.
2.7 Warranty and liability
The agreements and written consent in the contract of sale apply.
All warranty claims refer to the replacement of defective materials. Further claims are not accepted.
Warranty refers to normal operation during a shift/day.
The warranty periods are reduced accordingly for multiple shift operation.
Warranty claims against the manufacturer are excluded if any modifications or changes which have not
been expressly authorized by the manufacturer or agreed with the manufacturer are carried out at the
machine or to its components.
The same applies for commissioning without prior written acceptance.