![background image](http://html.mh-extra.com/html/vbrick/9000-series/9000-series_admin-manual_857502038.webp)
30
© 2015 VBrick Systems, Inc.
4. Enable
Presenter Mode
. See: Additional System Settings for information on enabling
Presenter Mode.
Manage Configuration Page Topics:
Advanced Configurations
The functions in the
Advanced Configurations
menu are generally used by system
administrators to configure management parameters. These parameters should not be
changed except by knowledgeable systems administrators.
Note:
Some features of the Presenter encoder may vary or be limited in scope based
upon the encoder hardware.
Not all 9000 encoders can support Presenter Mode and will not accept a Presenter
Feature License. Also, the Presenter feature is not supported by any 9000 model that
includes a decoder and on some older encoder units.
There are two ways to check if a unit is too old to accept a Presenter Encoder Feature
License:
• The part number (P/N) on the bottom of the chassis will end with zero.
• The
Board Assembly Number
(See: Monitor Manufacturing Information > Monitor
> Monitor the System)will end with four digits less than 0110.
Summary of Contents for 9000 Series
