VBrick 9000 Series, Admin Manual

Page: 33 / 192

System Configuration
VBrick 9000 Encoder Admin Guide 25

Manage Configuration Page Topics:
Reset System Configuration
Read System Configuration
Restore System Configuration
Auto Configuration
Feature License
Read System Configuration

To access the
Read System Configuration
fields:
1. Navigate to
System Configuration
>
Manage Configuration
>
Read System Configuration
section.
This function lets you read configuration parameters from the encoder to a file, as well as
write configuration parameters from a file to the encoder. The file is an .xml file and Internet
Explorer is the assumed browser. Note that encoder the .xml file is read
from , and the
encoder that the .xml file is written to , should be running the same version of code.
Mismatched versions may work but are not supported or guaranteed.
Use any text editor, preferably an .xml editor to make changes to the file. You can change the
"values" field as well as delete objects as necessary. Make sure the right data types are used.
For example if a parameter takes integer values, do not enter a string. Also IP Address
parameters must have the right IP syntax. Enter "0.0.0.0" to enter a null IP address. Blanks
and null strings are not valid IP Addresses.
You can read the configuration parameters from the encoder by clicking the
Read
button on
the page. After clicking on the button, follow the browser’s instruction on saving the file to
your PC. The configuration is saved as cfgdata.xml but can be renamed. See the image below
Button Description
Default All Sets all parameters except Network DHCP, IP Address, Subnet Mask,
Gateway IP, User Names, Passwords and System Date & Time.
Factory Default Sets all parameters (including EULA acceptance) to factory defaults
with the exception of System Date and Time.