VBrick 9000 Series, Admin Manual

Page: 32 / 192

24 © 2015 VBrick Systems, Inc.
Table 1. User Name and Password Field Attributes
Table 2. Default User Names, Passwords, and Access Level
Manage Configuration
This
Manage Configuration
page lets you reset some or all of the parameters in the encoder
configuration. It also lets you read and save the current configuration to an .xml file and
restore that configuration if necessary.
Reset System Configuration

To access the
Reset System Configuration
fields:
1. Navigate to
System Configuration
>
Manage Configuration
>
Reset System Configuration
section.
This menu lets you default some or all encoder configuration parameters.
User Name Enter desired user name. Cannot be blank or exceed 20 characters. It
may include any combination of alphanumeric characters and only the
following special characters:
~ ! # $ ^ * + & [ ] { } | - < >
See
Table 2 below for defaults.
Password Enter password. Cannot be blank or exceed 20 characters. May include
any combination of alphanumeric characters but only the following
special characters:
~ ! # $ ^ * + & [ ] { } | - < >
See Table 2
below for defaults.
Confirm Confirm new password entry. The encoder will then display a user
message and reboot.
User Level Default User Name Default Password Access Level
Administrator admin admin Read, diagnostics, edit,
passwords.
Operator operator operator Read, diagnostics, edit.
Diagnostics diagnostics diagnostics Read, diagnostics.
Public public public Read
Front Panel NA NA Front panel encoders only.
Allows direct access to keypad
functions on encoder front panel
if set.