VBrick 9000 Series, Admin Manual

Page: 161 / 192

Monitor
VBrick 9000 Encoder Admin Guide 153
Transmitter Name Transmitter Name (from Encoder Configuration > Transmitters page).
Click on hyperlink to jump to Transmitters page.
State •
Transmitting
– no transmitter problems detected.
•
Video Input Disabled
– no video input
•
Audio Input Disabled
– no audio input.
•
Disabled
– transmitter has not been enabled.
•
Ping Failed
– ping to unicast destination failed.
•
Ports Not Open
– IP port failure.
•
Loopback Address
– destination address is a loopback address.
•
Invalid Authorization
– user name/password incorrect for
AutoUnicast or RTMP.
•
Rejected
– AutoUnicast server connection issue.
•
Video Problem
– Video input error.
•
Global Override
– Global Override set.
•
Program Override
- Program Override set.
•
Invalid Application
– RTMP error.
•
Not FEC Protected
– one or both of the FEC sockets are not
operational.
•
No Video Data
– Video is enabled in the stream but disabled on the
configuration page.
•
No Audio Data
– Audio is enabled in the stream but disabled on the
configuration page.
Destination Destination IP Address or Host Name (from Encoder Configuration >
Transmitters page).
RTP Transport
Stream Auto Unicast
(UDP) Auto Unicast
(TCP) RTMP
Video Port Configured
port. Configured
Transport
Stream port. Negotiated port. Negotiated
port. Configured
port.
Audio Port
Configured
port. N/A Negotiated port. N/A N/A
Bytes Transferred Use Reset Counters to reset to zero.
IP Packets Sent Use Reset Counters to reset to zero.