background image

22

© 2015 VBrick Systems, Inc.

General Page Topics:

System Identification Settings

System Time Settings

Additional System Settings

System Reset

Front Panel Settings

Link the Encoder to VBrick Rev

Link the Encoder to VBrick Rev

To access the 

VBrick Rev Interface 

fields:

1. Navigate to 

System Configuration

 > 

General 

>

 VBrick Rev Interface 

section.

Before you may link an encoder with VBrick Rev so that it may be used as a video source, you 
must enable and configure it to recognize Rev in the 

System Configuration

 menu. If you do 

not complete these fields before you add your encoder as a device in Rev, your encoder will 
not function and link correctly with Rev. 

Display Hostname

Check to display the encoder host name. If host name is not 
configured (on System Configuration > Network page) the 
MAC address is used. Default = enabled. 

Display User Description Check to display the user-defined text. Default = enabled. See 

"Front Panel LCD Display" topic in 

Getting Started Guide

.

User Description 1

Enter user-defined text (20 chars. max.) that will be displayed on 
first line of LCD panel. Default = 

VBrick Systems

 

User Description 2

Enter user-defined text (20 chars. max.) that will be displayed on 
second line of LCD panel. Default = 

\r (Release x.x.x)

Field

Description

VBrick Rev Interface 
Enable

Check to enable so that the encoder may be used with Rev.

Host

Enter the URL for your Rev host.

API Key

An API key is created in Rev for your encoder. Enter that key in 
this field. See Rev documentation on how to create an API key 
for more information.

Field

Description

Summary of Contents for 9000 Series

































































































































































































Reviews: