Key Length Value (KLV) Metadata
VBrick 9000 Encoder Admin Guide
171
To configure SDI LDS Passthrough:
1. Connect an input device to the SDI port on the encoder.
2. Navigate to Encoder Configuration > Video.
a. Set
KLV
to
Serial LDS Passthrough
.
3. Navigate to Encoder Configuration > Streams.
a. Set Transport Type to
MPEG2TS
.
b. Check
Enable KLV
.
c. Configure other advanced settings as necessary.
Network LDS Passthrough
Network LDS (Local Data Sets) Passthrough allows use of the encoder's IP interface as an
out-of-band mechanism to embed KLV data in the video stream at a significantly higher bit
rate than ESD to LDS (and with no character limit). KLV data from a proprietary device is
input via the IP interface on the encoder and is embedded in the transport stream as KLV
metadata per MISB standard 601.3 and MISB Standard 0604 Section 6.2. The metadata PTS
(timestamp) source is configurable as the LDS packet's reception time or the timestamp in
the LDS packet.
To configure Network LDS Passthrough:
1. Configure an LDS data source to send the LDS data to an IP port on the encoder.
2. Navigate to Encoder Configuration > Video Input.
a. Set
KLV
to
Network LDS Passthrough
.
b. Set KLV Port to the IP port used for LDS data reception (default = 7777).
3. Navigate to Encoder Configuration > Streams.
a. Set Transport Type to
MPEG2TS
.
b. Check
Enable KLV
.
c. Configure other advanced settings as necessary.
Cursor on Target (CoT) to Local Data Set (LDS)
Serial CoT to LDS
In this method Cursor on Target (CoT) metadata input via the standard RS232/422 interface
on the encoder. It is then converted to LDS per MISB EG 0805, MISB Standard 0601.3, and
VBrick extensions, and is embedded in the transport stream as KLV metadata per MISB
Standard 0604 Section 6.2.
To configure Serial CoT to LDS:
1. Connect a CoT data source to the serial (COM) port on the encoder.
2. Navigate to Encoder Configuration > Video.
a. Set
KLV
to
Serial CoT to LDS
.
3. Navigate to Encoder Configuration > Streams.
a. Set Transport Type to
MPEG2TS
.
b. Check
Enable KLV
.
c. Configure other advanced settings as necessary.
Summary of Contents for 9000 Series
