VBrick 9000 Series, Admin Manual

Page: 53 / 192

System Configuration
VBrick 9000 Encoder Admin Guide 45
Use this page to manage SNMP passwords. The same fields are used to define passwords for
all users.
SNMP Traps

To access the
SNMP Traps
fields:
1. Navigate to
System Configuration
>
Advanced Configurations
>
SNMP Traps
.
VBrick supports SNMP v2 and SNMP v3 traps. SNMP traps are a subset of the SNMP
management component of the encoder. Use of any element of the SNMP management
system requires use of an SNMP browser or SNMP manager application (not supplied). The
SNMP MIB, which formally defines the SNMP interface to the encoder, is contained within
the install directory of the VBrick release or from the Downloads page on the VBrick
website. The SNMP MIB is located in
vbrickSystem.mib
and the default installation directory
is:
Program Files\VBrick\VBrick 7000-8000-9000\download\ReleaseVx_x_xx
Field Description
User Name Read-only. Set user name on Usernames & Passwords page.
Authentication Password Enter password. Cannot exceed 20 characters. May include any
combination of alphanumeric characters but only the following
special characters:
~ ! # $ ^ * + & [ ] { } | < >
See Table 2 on the Usernames & Passwords topic for default
values.
Authentication Protocol Select protocol: HMAC-MD5 or HMAC-SHA.
Privacy Password Required.
Security Level • No Authentication, No Privacy (Default).
• Authentication. No Privacy.
• Authentication and Privacy (CBC-DES)