56
© 2015 VBrick Systems, Inc.
When making configuration changes, the slot shown in bold (see Figure 1 below) is the
currently selected slot, an asterisk (*) next to the Slot/Channel header near the top of the
page indicates there are pending changes to the configuration which have not yet been
"applied," and a red exclamation point indicates a configuration error in that slot.
Figure 1.
Video Configuration: Part 1 – Video Input
Keep in mind that any currently active streams will be momentarily disrupted every time you
click
Apply
. To avoid intermittent disruptions on units with multiple slots and channels, wait
until you have configured changes on all slots and channels, and then click
Apply
. This
behavior only applies to the
Encoder Configuration
>
Video
and
Audio
pages. On all other
pages you must click
Apply
before you exit the page.
Figure 2.
Quad Channel Encoder (no SDI)
Figure 3.
Dual Channel Encoder (with SDI)
Summary of Contents for 9000 Series
