VBrick 9000 Series, Admin Manual

Page: 30 / 192

22 © 2015 VBrick Systems, Inc.

General Page Topics:
System Identification Settings
System Time Settings
Additional System Settings
System Reset
Front Panel Settings
Link the Encoder to VBrick Rev
Link the Encoder to VBrick Rev

To access the
VBrick Rev Interface
fields:
1. Navigate to
System Configuration
>
General
>
VBrick Rev Interface
section.
Before you may link an encoder with VBrick Rev so that it may be used as a video source, you
must enable and configure it to recognize Rev in the
System Configuration
menu. If you do
not complete these fields before you add your encoder as a device in Rev, your encoder will
not function and link correctly with Rev.
Display Hostname Check to display the encoder host name. If host name is not
configured (on System Configuration > Network page) the
MAC address is used. Default = enabled.
Display User Description Check to display the user-defined text. Default = enabled. See
"Front Panel LCD Display" topic in Getting Started Guide .
User Description 1 Enter user-defined text (20 chars. max.) that will be displayed on
first line of LCD panel. Default =
VBrick Systems
User Description 2 Enter user-defined text (20 chars. max.) that will be displayed on
second line of LCD panel. Default =
\r (Release x.x.x)
Field Description
VBrick Rev Interface
Enable Check to enable so that the encoder may be used with Rev.
Host Enter the URL for your Rev host.
API Key An API key is created in Rev for your encoder. Enter that key in
this field. See Rev documentation on how to create an API key
for more information.
Field Description