Vauxhall Signum, Owner'S Manual

Page: 246 / 310

241 Self-help, vehicle care
7. Screw the filler hose to the tyre valve.
8. The switch on the compressor must be
set to § .
9. Connect the compressor plug to the
accessory socket or cigarette lighter
socket. Accessory socket – see page 94.
10. Switch on ignition.
To prevent battery discharge, we
recommend that you leave the engine
running.
11. Set the rocker switch on the compressor
to I . The tyre is filled with sealant.
12. While the sealant bottle drains (approx.
30 seconds) the pressure indicator on
the compressor briefly points to 6 bar.
Pressure then sinks again.
13. All of the sealant is pumped into the
tyre. Afterwards, the tyre is filled with
air.
14. The prescribed tyre pressure – see
page 288 should be reached within
10 minutes. Switch off the compressor
when the correct pressure is obtained.
If the specified tyre pressure is not
reached within 10 minutes, remove the
tyre repair kit. Move the vehicle through
one tyre rotation, approx. 2 metres, in
either direction. Reconnect the tyre
repair kit and continue the filling
process for 10 minutes. If the specified
tyre pressure is still not reached, the tyre
is too badly damaged. Park the vehicle
and contact a workshop.