Vauxhall Signum Owner'S Manual Download

Page: 223 / 310

218

Driving and operation

Roof racks

For safety reasons and to avoid roof

damage, we recommend using the

Vauxhall roof rack system approved for

your vehicle.
Fasten the roof rack following the

instructions that accompany the system.
Driving hints – see page 184.

Version without roof railing

Fold fitting opening covers upward.
Attach roof rack at appropriate points, see

enclosed roof luggage rack system

instructions.

Version with roof railing

Attach roof rack to roof railing at points

shown in figure, see enclosed roof luggage

rack system instructions.

Warning

Disregard of these notes can lead to

injuries which may be fatal. Vehicle

passengers should be informed

accordingly.

Summary of Contents for Signum























































































































































































































































































































Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands

Vauxhall Signum, Owner'S Manual

Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands