Vauxhall Signum Owner'S Manual Download

Page: 185 / 310

180

Driving and operation

Winter program

Press button

if you are having problems

starting off on a slippery road surface.
To activate

The winter program can be switched in

Automatic mode (

illuminates in the

transmission display, see page 176). The

vehicle shifts to 4th gear.

To deactivate

The winter program is switched off by:

pressing button

again,

switching off the ignition,

switching to Manual mode.

To protect against damage, the starting-

off aid automatically cuts out at very high

transmission oil temperatures.

Kickdown

Depress accelerator past resistance point:

transmission shifts to a lower gear

depending on engine speed. Full engine

power is available for acceleration.
For safety reasons, kickdown is available in

both automatic mode and manual mode.

Summary of Contents for Signum























































































































































































































































































































Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands

Vauxhall Signum, Owner'S Manual

Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands