Vauxhall Signum Owner'S Manual Download

Page: 100 / 310

Seats, interior

Ashtray

To be used only for ash and not for

combustible rubbish.

Front ashtray

The ash tray is in the front centre console

beneath a cover.
The cover opens when pressed at the point

indicated.

To empty, grip both sides of the ashtray

insert at the spots illustrated and pull

upwards.

Rear ashtray

The ash tray is in the rear centre console.
The cover opens when pressed at the point

indicated.
To empty: open the ashtray, press the

spring (arrow) and pull out the ashtray.

Warning

Failure to observe these descriptions can

lead to injuries which may be fatal.

Vehicle passengers should be informed

accordingly.

Summary of Contents for Signum























































































































































































































































































































Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands

Vauxhall Signum, Owner'S Manual

Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands