99
Instruments, controls
R
Brake system, clutch system
Control indicator lights or flashes red.
It comes on when the ignition is switched on
if the hand brake is applied or if the brake
and clutch fluid level is too low. For further
instructions – see pages 209, 272.
For vehicles with Easytronic
3
, the control
indicator flashes for a few seconds when
the ignition is turned off if the hand brake
is not applied.
9
Warning
Illuminate if the handbrake has been
released: stop vehicle and interrupt
journey immediately. Contact a
workshop for assistance.
p
Alternator
Control indicator lights or flashes red.
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Flashing while starting
Battery voltage too low. Have electrical
system tested by a workshop.
Illuminates when the engine is running
Stop and switch engine off. Battery will not
be charged. Engine cooling may be
interrupted. Effect of brake servo unit may
stop in vehicles with diesel engines.
Contact a workshop for assistance.
v
Airbag systems
3
, belt tensioners
3
Control indicator lights up red
Illuminates when the engine is running
Fault in the airbag systems, seat
occupancy recognition
3
or belt tensioner –
see pages 73, 86.
Summary of Contents for Signum
