Vauxhall Signum Owner'S Manual Download

Page: 259 / 310

254

Self-help, vehicle care

Adaptive Forward Lighting

system

Xenon headlight system for main and

dipped beam together with curve

illumination based on steering angle.

Halogen headlight system, Xenon

headlight system,

parking lights

1. Open bonnet.
2. To change the bulb on the left, remove

filler neck from windscreen wash system

bottle, see page 249. As the headlight

has to be removed, have the bulb on the

right changed by a workshop.

3. Turn the headlight cover anticlockwise

and remove.

4. Remove parking light bulb holder from

reflector.

Warning

Xenon headlights operate at very high

voltage. Do not touch, risk of fatal injury.

Only have bulbs for dipped beam, main

beam, turn lighting, parking lights and

indicators changed by a workshop.

Summary of Contents for Signum























































































































































































































































































































Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands

Vauxhall Signum, Owner'S Manual

Search results

Summary of Contents for Signum

Reviews:

Related manuals for Signum

Brands by name

Popular brands